134 MHZ HPF BUILT & TESTED

​​​​

​​It eliminates strong broadcast FM transmissions at 88-108 MHZ from coming into a 2 m/70 cm transceiver. It helps lower receiver noise and IMD products so receiving weak wanted signals is much more possible. On Tx, it is transparent up to 100 Watts.


Since it is easy for hand soldering, it is offered as a DIY KIT of parts which includes all the components, the box (80x25x25 mm) and the N-type connectors, one male and one female. The capacitors are rated at 630 V or 1 KV and the square formed inductors at 4.5 A.  A high quality PCB is also supplied which fits inside the box perfectly just between the two connectors. Two ground connections to the PCB from each connector is only required and this is done using a high power soldering iron and copper braid.​



134 MHZ HPF DIY KIT

ORDERS For a Built & Tested Filter: EUR 59.00

​The prices do not include 24% Greek VAT applicable only to individual buyers from European Union. 
The shipping is with registered mail  (your signature is required upon delivery). 
We usually ship the next day and it takes about a week to 10 days for USA or Australia, less than a week for Europe.​

114 (or 134) MHZ High-Pass Filter



 Good to 500 MHZ

 Handles 100 W on TX

 DIY KIT complete with box, N-   type connectors and all parts



​​​This filter KIT is offered in two variations, the first with the cut-off at 114 MHZ and the second at 134 MHZ. The main difference is the rejection of the FM Broadcast band which is -7 dB at 108 MHZ and - 50 dB at 88 MHZ for the 114 MHZ filter, while it is -36 dB @ 108 MHZ and - 50 dB at 88 MHZ for the134 MHZ filter. ​The rejection is deeper for the 134 MHZ filter. Another difference is that the insertion loss at 144 MHZ is about half a dB lower with the 114 MHZ filter. So depending of how much attenuation is required of the FM broadcast band the user can make his choise which also affects the maximum power handling. An insertion loss figure of 0.5 dB at 145 MHZ or at 435 MHZ, means that if transmitting with 50 W then 5.5W will turn into heat.



114 MHZ HPF BUILT & TESTED

Fill your basket with  ferrites, RF cables, RF connectors, transistors, ICs etc. on our shop


https://www.sv1afn.com/shop.html

114 MHZ HPF DIY KIT

ORDERS For a Complete KIT of parts: EUR 49.00

​The prices do not include 24% Greek VAT applicable only to individual buyers from European Union. 
The shipping is with registered mail  (your signature is required upon delivery). 
We usually ship the next day and it takes about a week to 10 days for USA or Australia, less than a week for Europe.​