10 ppm accuracy, 8 pF capacitance, equivalent to KYOCERA CX3225SB27000D0FLJZ1 as suggested in AN551 of Silicon Labs for using with the Si5351A chip.
1.GENERAL SPECIFICATIONS
1.1 Holder Style : SPK-3225
1.2 Frequency : 27.000MHz
1.3 Mode Of Oscillation : Fundamental
1.4 Frequency tolerance at 25℃ :+/- 10 PPM
1.5 Frequency Stability at (-40℃~+85℃) : +/-20 PPM
1.6 Load Capacitance ( CL ) : 8 pf
1.7 Static capacitance (CO) : 5PF max
1.8 Ts :
1.9 Resonance Resistance ( RR) : 60 ohm
1.10 Drive Level : 100 uW max
1.11 Insulatiom Resistance : 500M ohm MIN
1.12 Aging : +/-5ppm/year
1.13 Operating temperature :- 40 ℃~+85 ℃
1.14 Measurement Condition : the reference temperature shall be at 25℃±2℃
- ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
The crystal shall meet electrical characteristics and suffer no physical damage after being subject to the following conditions.
2.1 Storage Temperature :-50℃- 105℃
2.2 Shock: drop freely from 75cm height 3 times on 30mm thick hard wooden board.
2.3 Vibration: frequency 10—55Hz
Amplitude 1.5mm
2 hours in each of 3 mutually perpendicular direction.
2.4 Solderability: temperature 235℃±5℃
Immersion duration: 2±0.5 seconds
2.5 Resistance to soldering heat: temperature 260℃±5℃
2.6 Humidity: humidity 95%±3, temperature 40℃,96 hours.
2.7 Seal: pressure :400Kpa, immersion duration : 30 minutes,
Leakage rate<5 x10-9 Pa m3/s
2.8 Terminal strength: pull:1.5kg,30 seconds
Bend:0.75kg,90℃, 2 times.
2.9 Temperature cycle: lowest temperature –40℃,30minutes/cycle
Highest temperature +85℃,30 minutes/cycle
10 cycles
2.10 Aging: temperature +85℃
Duration 30 days.