10 MHZ Distribution Amplifier (Built & Tested Unit)

• 10 Output ports - 5 LVCMOS 3.3V  + 5 Sinewave Isolated
• ​50 Ohm ports
• External input (female SMA connector) for your reference signal applied at -18...+10 dBm
• Internal 0.28 ppm TCXO factory trimmed to 10 MHZ
• Disable output sync input & switch

The distribution amplifier is housed inside a 100 x 100 mm aluminum box.

​It is based on the IDT 5PB1110PGG LVCMOS clock buffer chip which works up to 200 MHZ and offers very low additve jitter of less than 50 fs and very low pin-to-pin scew of 50 ps.

Fig. 2. Harmonics attenuation: More than 60 dB for the 2nd harmonic and more than 73 dB for the 3rd for the sinewave output ports